Blind hem, this word seems to be that we have to do a lot of hard work and God knows what kind of tips and tricks. I learned about the blind spot shortly after starting my sewing classes and it was very easy. When I practiced it on the best sewing machine for beginners here, then I knew that it is easy to get used to it. You should also try this sewing technique.
Step 1: Settings
Again, like most of my blogs, I emphasize verifying the configuration of the sewing machine before starting to sew any project on the sewing machine. If your configuration is not up to par, it can be a big problem for you later and you will have the only option that is to extract the stitches. If you have little knowledge about the sewing machine, keep the manual in your hand for constant guidance.
Step 2: Fold the fabric
Now the next step is to fold the hem of the fabric and define how much clean work you can do? You should be careful if all the rough edges of the hem are completely inside the crease. You must start folding from the wrong side both times and press it with the help of your fingers. The next thing to focus on is how to keep it in place.
Step 3: presser foot
The presser foot is one of the things during sewing that makes your job much easier and simpler. There is nothing to worry about if you do not have a presser foot because you can also work with the normal foot. If you have a budget to spend on sewing tools, I recommend buying a special presser foot to simplify project work.
Step 4: Sewing
Now, this is the time to start sewing the hem and flaunt your professional skills to the world. The straight stitch will be at the hem of the hem and after 4 constant stitches, the zigzag stitch will go to the left. The technique to apply to the fold is to control it with the help of pins and take care of the width and length of the zigzag stitch.
Step 5: pressing
The hem looks amazing when it’s flat. Personally, I think that if you are going to press the hem during all the work, even during sewing, you will get the exact result you want. Many people like to keep weights on the hem so that it is flat, but in my opinion, there is nothing better than ironing. If you are not in a hurry and can spend time at the ironing station, you should do so.
Conclusion
Being a sewer can sometimes be a bit difficult because you have to do a lot just by sitting in one place. You must remain calm to calm your nerves just to get the exact result and to make sure that whatever you are doing is incredible in appearance. For this purpose first, understand your sewing machine.
SHARE THIS PAGE!